Product Description

MF400 is a lubricant containing PTFE (Polytetrafluoroethylene) solid lubricating particles, which not only provides lubrication but also performs a cleaning function. After the solvent evaporates, the dried surface forms a PTFE lubricating layer with an extremely low coefficient of friction. It does not attract dust and offers excellent lubrication and wear-reducing properties.

With a wide operating temperature range, MF400 can be applied under extreme conditions for equipment that is otherwise difficult to lubricate. It extends lubrication intervals and provides outstanding protection.

The dry film lubricant penetrates and adheres to surfaces of metal, paper, wood, rubber, plastics, glass, and most other components requiring lubrication. It forms a non-contaminating lubricating film to prevent direct contact between frictional surfaces, thereby reducing wear.

Key Features & Performance

（1）Wide operating temperature range: -40℃ to +260℃, providing long-lasting and superior lubrication.

（2）Long service life: Maintenance-free throughout equipment lifetime.

（3）No flash point, no auto-ignition point.

（4）Chemically stable: Non-reactive with oxygen and even liquid oxygen; does not age.

（5）Low volatility at high temperatures.

（6）No carbon deposits or residues under high temperature.

（7）No migration or loss under heat.

（8）Resistant to steam, strong acids, strong alkalis, and over 2,000 chemicals.

（9）Excellent material compatibility with outstanding electrical insulation.

（10）Chemically inert: Insoluble in water and most solvents.

（11）Suitable for nearly all engineering plastics and elastomers.

（12）Superior film-forming, load-bearing, and lubricating properties.

（13）Easy application with no contamination or adhesion.

（14）Naturally even film thickness with high cost-effectiveness.

（15）Load-bearing capacity up to three times higher than conventional lubricants.

（16）Provides excellent water resistance and anti-rust protection on coated metal parts.

（17）Environmentally friendly green product; ozone-safe.

（18）Fast drying, non-toxic, odorless, non-irritating.

（19）Complies with EU environmental standards: RoHS, PFOS, Halogen-free.

Directions for Use

（1）Application methods: Brush coating, dip coating, or immersion.

（2）Ensure the surface is cleaned and dried before application.

（3）Apply in a well-ventilated area; once dried, the film poses no hazards.

Precautions for Use

（1）Contains solvents: Ensure adequate ventilation.

（2）Wash hands before smoking or eating after handling.

（3）May cause skin or eye irritation; wear appropriate protective equipment.

（4）In case of contact with eyes or skin, rinse thoroughly with water and seek medical attention if necessary.

（5）Wash hands thoroughly after handling.

Storage

（1）Volatile product: Seal tightly after use to avoid evaporation.

（2）Store in a cool, dry, and dark place, away from heat sources.

（3）Keep away from oxidizing agents, strong acids, and alkaline substances.

Limited Warranty Information

The information herein is accurate to the best of our knowledge. However, since the conditions and methods of using our products are beyond our control, this information cannot replace the customer’s responsibility to conduct tests to ensure product safety, effectiveness, and suitability for specific applications. Any usage recommendations provided shall not be construed as infringing upon any patents.

Packaging

6 kg / carton

1 kg / can

Note

This document does not include all safety information required for the safe handling of this product. Please read the product label and Safety Data Sheet (MSDS/SDS) before use for details on product safety, health hazards, and safe handling.

（1）Lubrication of tray sliding rails in CD-ROM and DVD-ROM drives.

（2）Lubrication of telescopic lenses and internal mechanisms in cameras, camcorders, and optical instruments.

（3）Friction lubrication of plastic components where conventional wet lubricants are unsuitable.